Hinges for wood

Design, load support strength and diversity are the hallmarks of our high quality door and window hinges, which rise fully to meet the aesthetic requirements of modern design and the engineering design needs of our customers.

We carry a complete range of hinges for both internal and external doors fulfilling every application requirement such as load bearing and adjustment features.

We are also one of the leading suppliers of pivot hinges for flush doors and can offer high quality products appreciated and valued by leading door producers.

W-Tec 3D+ Concealed hinges created for designer interiors

What was missing in the market is offered today by SFS intec. The new W-Tec 3D+ is a robust hinge, specifically designed to stabilise the openingand closing of the door. W-Tec 3D+ can be adjusted in height, laterally and depth and is available in three versions, to meet different capacity requirements. In addition to timber, thanks to a variety of accessories, W-Tec 3D+ can easily be applied to cover and steel frames.

» Further information hinge W-Tec 3D+

The W-Tec 3D+ hinge is an SFS intec product, guaranteeing quality thanks to strict controls both in the process and in tests performed on the hinge itself.
SFS intec is also available to offer solutions tailored to specific customer needs.

» Download: W-TEC 3D (EN) - PDF, 2.04 MB

CAB-R 3D

Design, load support and a wide range of applications : these are the main features of this high quality hinge, which fulfils both the aesthetic requirements of modern design and the engineering design needs of leading interior door producers.

This innovative hinge system is the result of continuous research work by SFS intec relating to both suitable materials but also more importantly to the market requirements of the modern end-user.

The CAB-R-3D hinge can be adjusted with a single hexagonal key in all three directions [ 0/+3 mm in height, +/- 1.5 mm sideways and +/- 2 mm contact pressure. The door hinge can be fitted left or right and turned vertically and horizontally. Thus every technical requirement of the products is fulfilled with a single hinge design. The CAB-R 3D can be fitted to any 40 to 45 mm door with a simple milling operation.

» Download: Catalogue pivot hinges - PDF, 10.86 MB

Tutorial CAB-R 3D

CAB-R

Two dimensional setting, opening to 180 degrees and refined design are the hallmarks of the CAB-R hinge for flush doors (70 kg). The hinge is suitable for both left and right hanging doors, because it is designed symmetrically.

The side adjustment to vertical is done with a 4mm A/F Allen key in the wing of the hinge, providing a +/- 3mm adjustment range. The contact pressure is set with a second 3mm A/F Allen key on the frame section – with a +/- 1.5 mm adjustment. The moving parts are fitted with maintenance-free bearings which guarantee a long problem-free working life.

Two hinges can support 70 kg per door. The hinge system has been tested to 200.000 operating cycles with a resulting relaxation of 0.1 mm !

» Download: Catalogue pivot hinges - PDF, 10.86 MB

Tutorial CAB-R

CIR

The all-new invisible New CIR from SFS intec is all about simple, economical door hanging. The hinge can be used for left or right opening, as it is fully symmetrical.

The side adjustment to vertical is done with a 4mm A/F Allen key in the wing of the hinge, providing a +/- 3mm adjustment range. The contact pressure is set with a second 3mm A/F Allen key on the frame section – with a +/- 1.5 mm adjustment. The moving parts are fitted with maintenance-free bearings which guarantee a long problem-free working life.

Two hinges can support 70 kg per door. The hinge system has been tested to 200.000 operating cycles with a resulting relaxation of 0.1 mm !

» Download: Catalogue pivot hinges - PDF, 10.86 MB

Tutorial CIR

Easy 3D-S

The Easy 3D-S is the new hinge for doors with raised features. It had been designed by SFS intec to meet the needs of window and internal door manufacturers, where the key points are design, ease-of-use, colour options and easy adjustment. The hinge can be adjusted in three directions from the front after door hanging, [60/80Kg]; and has a high load bearing.

The Easy 3D is very simple to install and thus suited to all sorts of geometries – with or without seals.

The 3D-S hinge has lift-off intruder protection; and features three-way adjustment with a single Allen key (0/+2mm in height, +/-2mm sideways and +/- 4mm contact pressure)

» Download: Leaflet Easy 3D-S - PDF, 1.55 MB

Easy 3D

Inspired by new trends and thinking about the needs of the end user, in recent years, SFS intec has introduced a complete programme of recessed hinges for wooden house doors onto the market.

The advantages of the Easy 3D recessed hinge:
» Load bearing strength of up to 160 kg
» Very high door stability
» Always stays vertical
» Adds a lot of aesthetic appeal

» Further information hinge Easy 3D

Excellent corrosion resistance, standard inclusion of shaft security, a wide range of colours and materials on offer provide every door with a quality design and aesthetic appeal.

» Download: Leaflet Easy 3D - PDF, 4.78 MB

Just 3D

In both public areas and in the home, flush mounting is “in”. That’s why we created a hinge with a particularly appealing aesthetic finish. This hinge addresses both the design imperative and the fitness for purpose. Adjustable in all three directions: height, side angle and contact pressure, using a single 4mm Allen key after hanging. It was classed as “outstanding” in the EN1935 test, which also confirmed the load bearing of 100 kg.

» Further information hinge Just 3D

Completely symmetrical and thus ideal for both left and right door opening, this hinge is also suitable for exterior doors thanks to the security fasteners. With its numerous combinations, it can be fitted to steel, solid or cover door frames. For timber frame fixing, a back plate is supplied to fix to the wall behind the frame. Further enhancing the appeal of the doors, the visible components of the hinge are made from stainless steel. A steel version is also available with a zinc or matt nickel finish.

» Download: Leaflet Just 3D - PDF, 1.03 MB

11R and 12R adjustable hinges

11R and 12R adjustable hinges are adjustable in all three directions: height, inclination and contact pressure.

These hinges have been sold all over the world for the last twenty years and have been fully tested and certified. To cover all our customers’ needs we produce these hinges In two diameters: 15 and 20 mm.

We also offer covers in aluminium, ABS and solid brass.

Standard hinges

We offer a big range of other hinges in diameters from 13 to 22 mm, in various finishes, colours and shapes and with a range of features.

Various standard hinges can be supplied in feed magazines for automatic installation with the appropriate tool.

Downloads

Hinges for ­wood

Contact

SFS intec S.r.l. unipersonale
Via Castelfranco Veneto n.71
IT-33170 Pordenone
T +39 0434 99 51
F +39 0434 99 52 01