Mechanical fixing technology for rainscreen cladding

A complete range at every level

With self drilling and thread forming screws in stainless or carbon steel, complete blind rivet and the anchor range, SFS intec offers fixing solutions for all aspects of rainscreen cladding. The package is rounded off with a range of accessories and a competent engineering consultancy support and on-site service. You benefit from a maximum level of efficiency and security at every phase of the construction project.

An overview of the fastener possibilities for the various levels can be found below.

Substructure

Whether you want a concealed or visible fastening system, we can offer the right solution for almost every type of façade.

A brief extract of our product range

The system covers vertical and horizontal aluminium brackets and rails.

Anchorage of the substructure

SFS intec offers a complete product range for anchoring timber and metal substructures to a variety of substrates.

A brief extract of our product range

Click to enlarge

Whether it is a difficult or unknown substrate, with this anchor range you have nothing to fear. Approvals for these façade anchorages clearly demonstrate the faultless functioning of these fasteners in the specific applications.

Fixing the support frame in place

SFS intec offers a complete product range for fixing timber and metal support frames.

A brief extract of our product range

Click to enlarge

Self drilling fasteners
Self drilling fasteners in A2 or A4 stainless steel enable secure fixing of support frames. Special features ensure fastener security while inhibiting over-torquing: uncompromising security.

Rivets
Large head diameter rivets in A4 stainless steel or aluminium, in combination with the special moving point nose-pice for the Accubird installation tool, ensures simple, efficient insertion.

Installation tools
DI650 power tool with integrated clutch and various battery powered, cordless riveting tools from GESIPA.

A brief extract of our product range

SFS intec offers a complete product range for fixing façade panels to timber and steel sub-constructions.

Click to enlarge

Self drilling fasteners
Stainless steel self drilling fasteners without pre-drilling fastened quickly and easily. Where required, the fasteners can be finished in the panel colour and delivered in short time if required directly on-site.

Blind rivets
Stainless steel or aluminium large flange rivets installed efficiently with the moving point nose-piece. In combination with the innovative drilling gauge it enables to copy the pre-drilled panel holes exactly centrically to the sub-construction.

Installation tools
DI650 power tool with integrated clutch and various battery powered, cordless riveting tools from GESIPA.

Accessories

SFS intec offers a complete range of finishing products like profiles, sealing tapes, fixed point sleeves, etc.

Anklicken für Grossansicht

Corner and ventilation profiles
Offering a perfect optical finish for corners and edge zones. Available in any colour where required.

Sealing tapes
Protecting timber supports from the weather, these strips are extremely heat proof and thus long-lasting.

Insulation anchors
Different lengths guarantee long-lasting insulation anchorage in diverse substrates.

Drilling gauge
Secure and precise pre-drilling of the sub-construction with the possibility to copy the pre-drilled panel hole centrally. Faultless installation of a rainscreen cladding.

Fixed point sleeves
Full flexibility at all times: using fixing point sleeves enables the decision to be made on site as to which hole in the panel will be used as fixed point.

Setting tools

Time is money; especially on site. That’s why productivity improving installation tools have always been a feature of the SFS intec service package.

This overview shows just an extract from the range of application specific tools available.

DI 650

  • The lightweight insertion tool for power tool fasteners and thread forming screws
  • Fatigue-free working thanks to the light weight

Accubird

  • For quick and easy installation of standard blind rivets up to Ø 5 mm all materials and BULB-TITE up to Ø 6.3 mm.
  • Setting force 10.000 N

Powerbird

  • For quick and easy installation of standard blind rivets up to Ø 6,4 mm all materials and BULB-TITE up to Ø 7.7 mm.
  • Setting force 13.000 N

For complete details of the range available in your market, please contact your regional technical expert.

Speed painting process

eBusiness: Made-to-measure to fit individual requirements

Alongside its innovative and reliable products, SFS intec offers a whole package of support services. Made-to-measure eBusiness to make your work that bit easier when it comes to safely planning important projects.

Learn more about SFS intec eBusiness.

Do you prefer personal contact?

Local partner construction

Contact

SFS intec AG
Construction
Rosenbergsaustrasse 10
CH-9435 Heerbrugg
T +41 71 727 50 81
F +41 71 757 56 99

2D & 3D CAD Models

Download 2D & 3D CAD Models

Speed painting process